How To Use An Antique Rolex Watch, Best Swiss Replica Watches

One of the ways to use an antique Rolex is to keep it from getting wet. First, you should pay attention to staying dry. This also applies to diving watches because it is inevitable that models that are old enough to be called antiques (with gum watch mirror specifications) are not waterproof. If you think about it carefully, it is a miracle that watches from 40 or 50 years ago can still maintain waterproof functions. Of course, there is no need to be so nervous and entangled. As long as you don’t let the watch get wet in daily use, you can prevent water from entering in most cases. However, if the watch does get wet, you should immediately go to the store where you bought it for after-sales repair. If you don’t deal with it quickly, the internal parts will rust more. In severe cases, the dial of the year will be damaged, and it will cost more to repair later. This is the same for watches of any age. In addition, a simple way to determine whether a watch has been soaked in water is to see if the watch mirror is fogged. Best swiss replica watches.

Ref.1602/8

Second, it cannot be hit. Watches are precision instruments, so they are not vibration-resistant, especially some antique watches with a long history. In addition, very severe collisions and vibrations may also cause the luminous paint to fall off. In addition to collisions or drops, you should avoid wearing the watch during physical exercise, such as running or playing ball. If it is subjected to a significant impact, the internal mechanism may be seriously damaged even if the appearance does not change. In a severe collision, you can check whether there is an abnormal sound or apparent deviation in accuracy by gently shaking the watch and checking the accuracy by observing the average daily difference within a week.

Ref.1675

Ref.16753

Third, it must be kept from potent magnetic forces. The accuracy of mechanical watches is affected by magnetic solid environments, so you should avoid exposing your watch to intense magnetic forces. The specific reason is that you only need to think about the parts structure of its internal movement to know, which applies not only to antique watches but also to modern fake watches. Daily, it would be best if you were careful not to store your watch with any items that emit strong magnetism, such as mobile phones, electronic devices, and other magnetic items. Since the influence of magnetism is inversely proportional to the distance, it is recommended that the watch be at least 5cm away from the magnetic source. However, I usually wear the watch to do computer work, so there should be no problem if there is no direct contact. In addition, if the watch suddenly loses accuracy, it may be magnetized. Even if it is magnetized, the magnetism can be eliminated. You can consult the store where you bought it first. Most stores will have this equipment.

Ref.1016

Ref.1655

Ref.16550

Many such people must own several watches and do not use antique watches frequently, but they should operate them from time to time. If you do not use antique watches occasionally, the interior, crown, buttons, etc. may get stuck; if it has just been overhauled, there is usually no problem, but older lubricants tend to stick more quickly than modern lubricants. In addition, regular operation checks can effectively detect defects promptly. Although it is unnecessary to do this every day, you should occasionally turn the mainspring slowly with the crown to check the operation. Another thing is to avoid regular inspections, which apply to antique and modern watches. Inspecting every 3 to 5 years is recommended, depending on the model and use. Inspection is a maintenance process in which parts are disassembled, cleaned, and relubricated. At the same time, if any internal parts are deteriorated or damaged, they will be replaced as needed. If inspections are carried out, internal problems may be addressed, symptoms may worsen, other parts may be aged faster, and repair costs may even be unexpectedly high. Therefore, regular inspections are essential to continue to use for a long time.

Ref.1625

Finally, remember to maintain it properly after use. Whether an antique or modern watch, you can use a soft cloth-like cloth to wipe off the sweat or sebum accumulated during use. Regularly using a soft, dry toothbrush to remove any debris that enters the gap is also recommended, especially in the summer. Sweat, sebum, and dirt will cause the watch to rust. This rust will cause parts to deteriorate and damage. In severe cases, the watch will fall to the ground while worn. Keeping the watch clean is also comfortable, so if you feel the strap is dirty, you should clean the watch in time. So far, the charm of antique clocks and daily use methods have been introduced. So, which model should you choose when buying a Rolex vintage watch for the first time? Choosing the one you like is best based on the design and atmosphere. First-time friends will select their birth year, but one of the key points in choosing an antique watch is after-sales maintenance.
In most cases, it can be maintained and repaired at the service center, but you must keep the dial, hands, bezel, and strap in sync. If the maintenance cost of some vintage watches is too high or the parts have been discontinued, they can only be maintained and repaired by private repair workshops. Hence, it would help if you found a reliable after-sales maintenance channel when buying antique watches.

Ref.6265

To appreciate antique watches, one’s way of thinking is significant. Antique watches are not about precision; it is about whether you can feel the charm of the part that exceeds precision.